How to Program a Honeywell Home X2P Thermostat
To program a Honeywell Home X2P, press the Menu or Program button, set your weekday and weekend periods, and save each time block. The X2P uses 5-2 day scheduling: one schedule for Monday through Friday and another for Saturday and Sunday.
On this page (10 sections)
- What is the X2P's 5-2 day schedule?
- How do you program the weekday schedule?
- How do you program the weekend schedule?
- How do you set the time and day on the X2P?
- Can you use the X2P without a schedule?
- How do you change display settings and filter reminders?
- What should you do when the schedule won't save?
- Is the X2P the right thermostat for your system?
- How does the X2P decide when to run heat or cool?
- Which settings should you set first?
To program a Honeywell Home X2P, press the Menu or Program button, choose the weekday or weekend schedule, and set a time and temperature for each period. Save after each change.
The thermostat holds your settings, so you only repeat this when your routine changes.
This guide covers how to program Honeywell Home thermostat X2P settings step by step, plus display options, filter reminders, and what to do when the schedule won't stick. The same steps work on the RTH20B model, which is the model number printed on the X2P.
What is the X2P's 5-2 day schedule?
The 5-2 schedule splits the week into five weekday days and two weekend days. You set one routine for Monday through Friday and a separate one for Saturday and Sunday.
That's the whole programming model on this unit.
Honeywell Home keeps it simple on purpose. There are no separate blocks for each day of the week and no app.
You program at the wall plate with the buttons and the LCD screen. A large screen and clear font make the readings easy to see from a few steps back.
The X2P is a direct replacement for the RTH2300 and the RTH221, so if you're upgrading from either, the 5-2 idea will feel familiar. The RTH221 also used 5-2 scheduling.
Before you start, confirm your system type. The X2P is built for single-stage 1 heat/1 cool setups.
How do you program the weekday schedule?
Start on Monday morning: set the wake period first, then work through the day until sleep. Each period needs a start time and a target temperature, so write your routine on paper before you touch the buttons.
- Press the Program or Menu button to reach the schedule screen.
- Select the weekday group (Mon–Fri).
- Set the wake time and temperature for the first period.
- Move to the next period and set its time and temperature.
- Repeat for the remaining weekday periods, ending with sleep.
- Save or press Done to lock in the weekday schedule.
Keep the temperature steps small. A 2 to 4 degree change between occupied and empty periods is enough to save energy without making the house feel cold when you get home.
Don't stack periods back to back with no gap.
How do you program the weekend schedule?
Repeat the same steps for the Saturday and Sunday group, with later times. Most households wake later on weekends, so the first period often starts an hour or two after the weekday wake time.
Program the weekend group as its own schedule. Don't copy the weekday times and call it done, because a 6 a.m. weekend wake defeats the purpose of a schedule.
If your weekends vary a lot, keep the weekend plan loose: one morning period, one evening period, and sleep.
Press Save when you finish the weekend group. Then check both groups by stepping through the periods once.
A missed save is the usual reason a weekend schedule looks blank.
How do you set the time and day on the X2P?
Set the clock and day before you program any periods. A schedule runs on the thermostat's internal clock, so a wrong day means the weekday plan fires on a Saturday.
Open the menu and find the time and date setting. Use the up and down buttons to change the hour and minute, then confirm the day of the week.
The X2P is battery powered by 2 AA batteries, so the clock runs without a C-wire.
If the time resets after a power blink, the batteries are probably low. Swap both AA cells at the same time.
The X2P runs on batteries only, so there's no C-wire to fall back on.
Can you use the X2P without a schedule?
Yes. The X2P has a non-programmable option, so you can turn scheduling off and run it like a manual thermostat.
You set the temperature yourself and the unit holds it until you change it.
That's useful in a few situations. A vacation home or rental where nobody follows a weekday routine doesn't benefit from a schedule.
Some people simply prefer to adjust the dial by hand.
Switching to non-programmable mode doesn't remove the display settings or the filter reminder. You still get the large screen, custom display options, and the change filter alert.
You just lose the automatic temperature changes.
How do you change display settings and filter reminders?
The X2P lets you customize what the screen shows and whether it reminds you to change the filter. Both live in the menu, separate from the schedule.
Display settings cover brightness and what appears on screen. If the backlit display is too bright at night, lower it.
A dimmer screen is easier on the eyes in a bedroom hallway.
The change filter reminder can be turned on or off. Turn it on if you want a nudge every few months.
Clear the alert after you replace the filter so it doesn't keep flashing. If you'd rather track filter changes yourself, switch the reminder off.
What should you do when the schedule won't save?
Check the batteries first, then confirm you pressed Save after each period. A schedule that vanishes or reverts to default usually points to power, not to a broken thermostat.
Work through these in order:
- Replace both AA batteries, even if the display still looks fine.
- Confirm the day and time are correct after the battery swap.
- Step through each period and press Save before leaving the screen.
- Make sure you edited the right group (weekday or weekend).
- Check that the unit isn't sitting in non-programmable mode.
If the screen stays blank with fresh batteries, look at the battery contacts for corrosion. The X2P carries a 1-year warranty, so contact Honeywell Home support if the unit won't hold power at all.
Is the X2P the right thermostat for your system?
The X2P fits single-stage 1 heat/1 cool systems and simple 5-2 routines. It's a good match for a gas, oil, or electric forced-air furnace, hot water heat, or a single-stage heat pump.
It also works on 750 mV systems.
It does not work with electric baseboard heat (120-240V) or multi-stage systems. Check your current thermostat's wiring label before you buy.
If your system is multi-stage or you want app control, look elsewhere.
The Honeywell Home UWP wall plate makes installation easier and simplifies future device upgrades. That matters if you might move to a smarter model later.
If you're weighing app control against a simple programmable unit, our Honeywell Home T5 review covers what the smart step up adds. For a side-by-side on app control, see Honeywell T5 vs T6.
Where the X2P fits best

A battery-powered 5-2 day thermostat for single-stage systems, with no C-wire needed.
See it on AmazonThe X2P suits a household with a steady weekday routine and a different weekend rhythm. The 5-2 schedule covers both without per-day programming.
If you want the wider field first, browse our roundup of the best Honeywell thermostats for home use.
How does the X2P decide when to run heat or cool?
It reads the room temperature against your setpoint and switches the system on or off to close the gap. That's true whether you're running a schedule or a manual setting.
To understand the basics of that cycle in more depth, read how does the Honeywell Home thermostat work.
The X2P is a 1 heat/1 cool control. It turns the furnace or AC on and off, with no staging and no variable-speed logic.
On a single-stage system, that's exactly the control you need.
The extended 32°F low-heat setpoint matters in a garage or a lightly heated space. It lets the thermostat call for heat at a lower floor than a standard setpoint, which helps keep pipes from freezing in cold weather.
Which settings should you set first?
Set the clock and day, then the weekday periods, then the weekend periods, then the display and filter options. That order avoids reprogramming later.
If you follow one piece of advice from this guide to program your Honeywell Home thermostat X2P, make it this: write your routine on paper first. The buttons are easy; the schedule logic is where people get stuck.
Save each period as you go, keep the temperature steps small, and swap both AA batteries when the display dims. For app control or a wider feature set, compare the best Honeywell thermostats before you decide the X2P is your last upgrade.
Frequently asked questions
Can the Honeywell Home X2P be used without programming?
Yes. The X2P has a non-programmable option, so it can run as a manual thermostat where you set the temperature yourself.
That suits a cabin, a rental, or a home where nobody keeps a steady weekday routine.
What do the 5-2 day periods mean on the X2P?
The 5 is Monday through Friday and the 2 is Saturday and Sunday. Each period gets its own schedule, so weekdays can follow work or school hours while weekends run on a later wake time.
Does the X2P need a C-wire to run?
No. It runs on 2 AA batteries and needs no C-wire.
It works with single-stage 1 heat/1 cool systems, including forced air gas, oil, or electric, hot water heat, single-stage heat pumps, and 750 mV systems.
How do I turn off the filter reminder on the X2P?
Open the menu and find the change filter reminder setting. You can clear the alert after replacing the filter, and you can choose whether the reminder appears at all.
Check the manual for the exact button sequence on your unit.
Why did my X2P lose its schedule?
The most common cause is weak or dead AA batteries. Replace both batteries and reprogram the schedule.
If the display stays blank with fresh batteries, check the battery contacts before calling support.
About this guide: Our look at programming the Honeywell Home X2P thermostat draws on maker specs, materials and what owners report. See how we research.



