Guide

How to Set Temperature on an Emerson Thermostat

Updated on · By the Sustain Word team

Press the up or down arrow until your target temperature shows, then let the screen settle for a few seconds so the change saves. On most Emerson thermostats the arrows set the number directly, with no menu needed.

On this page (7 sections)
  1. Where are the temperature buttons on an Emerson thermostat?
  2. How do you set the temperature step by step?
  3. How do you set a schedule instead of one number?
  4. What do hold, away and vacation modes do to your setting?
  5. Why won't the thermostat accept your new temperature?
  6. Which thermostat should you pick if you want easier control?
  7. How often should you change the setpoint?

Here's how to set the temperature on an Emerson thermostat: press the up or down arrow until your target temperature shows, then leave the screen alone for a few seconds so it saves. The arrows adjust the setpoint directly, so you don't need a menu for the basic change.

The steps below cover the standard Emerson and Sensi models with arrow buttons. A touchscreen model works the same way, but you tap the number first to bring up the plus and minus controls.

Where are the temperature buttons on an Emerson thermostat?

The up and down arrows sit on the right side of the display on most Emerson models, with the mode button nearby and the fan or menu button on the other side. The screen stays dim until you touch a button, so the first press wakes it rather than changing anything.

Press once to light the display. The current room temperature shows large, and the setpoint appears smaller, often with a small "set" label or a blinking number.

The arrows move that setpoint in one degree steps on most models.

Some Emerson thermostats combine the arrow functions with a menu button. On those, a short press on the arrow changes the temperature, and a long press opens settings.

Hold the button for a second and watch the screen so you don't land in a setup menu by accident.

If your model has a touchscreen, tap the setpoint number first. Plus and minus controls appear, and you use those to move the number up or down.

This is the same setpoint change, just reached a different way.

How do you set the temperature step by step?

Wake the screen, press the arrows to your target, then wait for the save. That three step routine covers the basic setpoint change on almost every Emerson thermostat.

  1. Press any button to wake the display.
  2. Press up or down until the target temperature shows.
  3. Wait a few seconds without pressing anything.
  4. Check that the screen returns to the room temperature with your new setpoint saved.

The wait matters. Many Emerson units save the setpoint after a short pause, and pressing more buttons during that pause can cancel the change.

If the display flashes back to the old number, repeat the steps and pause longer at the end.

Set the mode first when you're switching seasons. Heat, cool, auto and off each behave differently, and a setpoint entered in the wrong mode won't do what you expect.

In auto mode, the thermostat decides whether to heat or cool to reach the number you set.

How to set the temperature on a Sensi thermostat

The Sensi ST55 works like a standard thermostat: press the up or down arrow to the number you want and let it save. The screen shows the room temperature and the setpoint together, and the buttons sit on the face of the unit.

Because the ST55 connects to Wi-Fi, the same change also appears in the Sensi app. You can set the temperature from the app instead of the wall, which helps when you're away from home.

The app is free and runs on both iPhone and Android.

The Sensi has a schedule feature, so a setpoint you enter by hand counts as a temporary hold on many setups. The thermostat returns to its program at the next scheduled period.

That's useful for an afternoon adjustment, but it means the number won't stay unless you change the schedule too.

How do you set a schedule instead of one number?

Program the thermostat when you want different temperatures at different times, rather than changing the setpoint by hand each day. Emerson and Sensi models support daily schedules with four typical periods: wake, leave, return and sleep.

Open the schedule menu, either with the menu button on the unit or in the app. Set a time and a temperature for each period on each day.

Most models let you copy one day's settings to the rest of the week so you only build the schedule once.

A typical winter schedule runs 68°F at wake, 62°F after everyone leaves, 68°F at return and 62°F at sleep. Our guide to what temperature to set your thermostat in winter covers the reasoning behind those numbers and how big a setback makes sense.

Check the schedule after a power cut. Some models keep it, others reset to a default program.

If the times look wrong, rebuild the schedule before you trust the setback to run on its own.

What do hold, away and vacation modes do to your setting?

Hold keeps your entered temperature instead of the schedule, which is handy for a day at home or a cold snap. Away and vacation modes drop the setpoint to a lower number while the house is empty.

Press the hold button, or hold the arrow on models without a dedicated key, to lock in the current setpoint. The screen usually shows "hold" or "temporary" so you know the schedule is paused.

Press hold again to release it.

Away mode goes further. It sets an energy saving temperature for an extended absence, often around 55°F in winter.

Return the thermostat to its normal mode a few hours before you get home so the house is comfortable when you walk in.

Vacation settings are worth using on any long trip. Heating an empty house to full comfort wastes energy for days, and the Emerson models that offer this mode do the setback in one button press.

Why won't the thermostat accept your new temperature?

A setpoint limit or a locked keypad stops most changes, and neither means the thermostat has failed. Check both before you try anything else.

Setpoint limits live in the installer settings. A minimum and maximum range caps how far the arrows will go.

If the display stops at 65°F or 75°F, a limit is probably set. A technician or the manual can walk you through lifting it.

A keypad lock stops all button input, often shown by a padlock icon. Open it with the code set at installation, or with the combination in the manual.

Renters sometimes find the previous occupant left a lock on.

A flat battery causes odd behaviour too. If the display goes blank or loses the time, the batteries are the likely cause.

Our guide to how to change batteries in an Emerson thermostat covers the swap for the common models.

Which thermostat should you pick if you want easier control?

A smart thermostat makes the setpoint easier to manage, because you can change the temperature from your phone and the schedule runs without you. Three options suit different budgets and wiring setups.

The Sensi ST55 is the closest step up from a standard Emerson thermostat. It uses buttons and fits the same wall space as a traditional unit, so the change feels familiar.

Emerson makes it, so the menu logic is similar to what you already know.

The Google Nest Thermostat suits anyone who wants the setpoint handled for them. It turns itself down when you leave and runs an energy efficient schedule from the Google Home app.

The screen is a simple touch strip rather than arrow buttons.

The Honeywell Home RTH9585WF gives you a bright color touchscreen and flexible programming. It needs a C-wire, so check your wiring before you buy.

The screen is easy to read, which helps if small numbers are hard to see.

For readers who want the largest, clearest numbers, our roundup of the best easy to read thermostats compares models built for visibility. And if you're comparing connected models more broadly, the best digital thermostats for the home covers the main features side by side.

How often should you change the setpoint?

Change it when your routine or the weather changes, not every day. A steady schedule with a few setbacks saves more energy than constant small adjustments.

Set the schedule once for the season and adjust only when something changes: a new work pattern, a cold week or a house full of guests. Each manual change costs a little comfort and a little energy, and most of them aren't needed.

Keep the thermostat away from direct sun, lamps and drafts so it reads the room accurately. A unit near a warm lamp will run the heat longer than it should.

Dust the vents on the unit now and then, and replace the filter on schedule so the system can reach the setpoint it's given.

When you're learning how to set temperature on an Emerson thermostat, the basic habit is simple: press the arrows, wait for the save, and let the schedule do the rest. Change the number by hand for short term needs and edit the schedule for the long term.

If the thermostat still won't hold a setting after a battery change and a lock check, call a technician. A stuck setpoint or a unit that ignores the schedule often points to a wiring or control board issue rather than the thermostat itself.

Frequently asked questions

How do I change the temperature on an Emerson thermostat?

Press the up or down arrow once to wake the screen, then keep pressing until your target shows. Wait a few seconds without touching it and the thermostat saves the setting and returns to the room reading.

Why won't my Emerson thermostat go to the temperature I want?

A setpoint range limit or a locked keypad is the usual cause. Check the installer settings for a high and low limit, and see whether the lock or hold feature is switched on before assuming the thermostat is broken.

What temperature should I set on an Emerson thermostat in winter?

Start at 68°F while people are awake and drop to around 62°F at night or when the house is empty. A 7 to 10 degree setback saves more than leaving one steady number all day, and a schedule handles the change for you.

How do I save a new temperature on a Sensi thermostat?

Press the up or down arrow to the number you want and leave it alone for a few seconds. The Sensi saves the setpoint and returns to the home screen, and the app shows the same change if the thermostat is connected to Wi-Fi.

Does the thermostat keep my setting when I switch it to off?

Yes, most Emerson thermostats remember the last setpoint when you set the mode to off and bring it back later. If the display loses its time or settings after a power cut, the batteries likely need replacing.